Battery extrusion testing machine-Dongguan Xinhang Instrument Equipment Co., Ltd. - Environmental reliability testing, mechanical testing series, battery testing series, optical measurement series

Products

Battery Puncture Tester Battery Extrusion Tester Battery Extrusion & Needling Machine Battery heavy impact testing machine Simulated High Altitude Low Pressure Tester Battery explosion-proof test chamber Battery combustion testing machine Battery temperature control high temperature short circuit tester Battery Abuse Tester Battery drop testing machine

Two-Dimensional Image Measurement Series

Aging Test Series

Cell phones/computers/electronics

Paper Printing & Packaging

Hardness Tester Series

Rubber/Plastic Testing Machine

Metallographic Testing Series

Earphone testing machine

Wire/cable testing machine

Oscilloscope

Consultation hotline

13925864159
13144873913

Battery extrusion testing machine

型号：XH-DC-8302

Contact Now

Product details
Requesting samples and information

Product Introduction

The battery extrusion testing machine is suitable for simulating the situation where various types of batteries are subjected to compression during use, transportation, storage, or disposal of household waste. Batteries are qualified as not exploding or catching fire. The battery extrusion testing machine complies with testing standards such as GB31241-2014 MT/T 1051 SAE, QC/T473/744, etc.

According to standards

GB 31241-2014 "Safety requirements for lithium-ion batteries and battery packs for portable electronic products"

YD/T 2344.1-2011 "Lithium iron phosphate battery packs for communication purposes - Part 1: Integrated batteries"

GB/T 21966-2008 "Safety requirements for lithium primary batteries and batteries during transportation"

YD 1268-2003 "Safety requirements and test methods for lithium batteries and chargers for mobile communication handheld devices"

GB/T 19521.11-2005 "Safety Code for Inspection of Hazardous Characteristics of Lithium Battery Pack Dangerous Goods"

IEC 62281: 2004 "Safety requirements for lithium primary batteries and batteries during transportation"

technical parameter

Squeezing section parameters

model	XH-DC-8302
Transmission mode	Hydraulic drive
Battery extrusion head (plate)	Standard circular extrusion plate, easy to disassemble and replace (size is 150mm diameter)
Squeezing degree	Squeeze continuously until the actual pressure reaches 13kN ± 0.2kN, hold for 1 minute, once the pressure is reached, the equipment will automatically release pressure and complete the extrusion;
Pressure range	1 kN~20 kN (commonly used 13 kN)
Pressure display accuracy	0.1N, sensor resolution: 1/10,00;
Unit conversion	Kg, N, lb
Data sampling frequency	80 times/second
Compress space	520 * 500 * 445mm (width * height * depth)
Machine extrusion stroke	300mm

Acupuncture parameters

ф 2mm - ф 8mm high-temperature resistant steel needle	Length is 100mm
Distance between needle tip and lower part	200mm flat surface for battery discharge
Clamping distance	10mm
Penetrating force	500-150kg
Power display	Pressure sensing LCD screen display
Effective stroke of oil cylinder	300mm
Driving method	Hydraulic drive
Box type equipment	Explosion proof, fireproof, corrosion-resistant, and easy to clean
Explosion proof inner box material	Stainless steel with iron fluorine soluble adhesive added at 1/3 of the box body, resistant to high temperature, corrosion, insulation, and easy to clean
Delay function	0-99 (H/M/S can be freely set and adjusted for testing time)
Machine size	seven hundred and thirty × seven hundred and seventy-five × 1910mm (width × deep × High
Using power supply	AC220V, 50HZ, 13A
Equipment power	2.2KW
Overall weight	Approximately 260kg

Get a free quote now!

Fill out the form below, including as much detailed information as possible, and we will reply to you as soon as possible.

Return to List