Product use: Battery high-altitude and low-voltage simulation test box, also known as battery high-altitude simulation test box. Designed to meet the testing requirements of UL, EN, IEC and other standards, the battery high-altitude simulation testing machine is designed to ensure the safety and reliability of the sample's low-pressure storage state in a short period of time. All tested samples are tested under a negative pressure of 11.6 kPa (1.68 psi), and the final test result requires that the battery must not explode or catch fire. In addition, the battery must not smoke or leak, and the battery protection valve cannot be damaged. The test cycle can be automatically controlled, Monitor the pressure changes inside the box throughout the entire process.

According to standards: UL 1642, UL2054, UN38.3 and other testing standards

Specification parameters:

Internal size: 400 (W) × 400 (H) × 400 (D) mm;

External dimensions: subject to the actual product;

The internal material is 304 # stainless steel plate;

The external material is: cold-rolled steel plate powder baking paint;

Door opening method: The door opens from right to left;

Operation control: located below the machine;

Button: specialized upper and lower string connection;

Door buckle: buckle type;

Observation light: None;

Sealing strip: High temperature resistant silicone;

Observation window: Tempered glass window;

Layer board: divided into 2 layers, equipped with 2 stainless steel mesh plates;

The vacuum tube joint is located inside the lower part of the machine;

The vacuum pump is installed at the bottom of the machine, with a power of 0.75KW/220V;

The machine is equipped with brake movable wheel feet;