1、 Overview of this device:

This machine can test the durability life of NATEBOOK (mobile phone, PDA), telephone, computer keyboard, electronic dictionary, pan blade, pull blade, micro switch, boat type switch, toggle switch, button switch buttons, and various buttons and switches. It can work simultaneously, independently, and test multiple products (each product can be tested at multiple points), and the buttons can choose different loads.

2、 Main technical parameters:

1. Specification: Three stations

2. Speed test range: 15-100 times/minute, adjustable speed;

3. The maximum load-bearing capacity of the test receiver is 10KG;

4. Test head load: 50g, 100g, 200g, 500g (three sets of weights in total);

5. The up and down travel of the receiver is 120mm;

6. Effective size of test bench placement: 150 x 200mm

7. Impact motion mode: driven by a motor cam, with linear bearing motion up and down, precise positioning, and frameless movement;

8. The counting instrument adopts an adjustable 6-digit range, with 0-99999 times; Voltage: 220V.

9. Three separate conduction counts are used to determine the circuit by fixing the normally open or normally closed ends of the product with red and black clamps

If the product is damaged any number of times, stop working.

3、 Usage:

1. Place the object to be tested on the workbench, and if there are any irregular objects, use a soft cotton cloth to level the bottom to ensure that the pressure head can move vertically up and down;

2. Adjusting the lifting platform: The front and rear butterfly screws can be adjusted, and then the circular nut in the middle can be turned. The platform will move up and down, and at the same time, the measured object can be fixed within the range of the pressure head stroke using the equipped fixture;

3. Select appropriate weights according to regulations and the load used in the experiment; Press the stop switch when adding weights;

4. Adjust the number of runs of the counter according to the testing requirements, place the machine steadily, and plug it into the power cord;

5. This instrument counts 1-999999 times (i.e. millions of times);

6. Adjust the speed according to demand, generally not too fast; The optimal rate is 50-70 times per minute; The machine will automatically shut down after completing the pre-set number of times