1、Overview of this device:

The small object drop test machine adopts a manual height adjustment method. The product is fixed on the fixture, and the drop button is pressed to release the product instantly. The product will undergo a free fall test and impact the surface of the test piece. The drop height can be adjusted up and down, and there is a height gauge attached to determine the drop height.

This machine is adjusted to a certain height according to regulations, allowing it to fall freely and strike the test material. The quality is judged based on the degree of damage. Suitable for designing finished products or components such as plastics, ceramics, acrylic, glass, electronics, electrical appliances, home appliances, plastics, communication, etc. that encounter collisions during installation and connection, in order to evaluate whether the product structure is defective or insufficient for testing. It can freely fall from a certain height, strike the test piece or component, and observe the degree of product damage.

2、Main technical parameters:

1. Impact height range: 0-1500MM adjustable

2. Control method: Electric control for falling, single drop impact.

3. Sample size: 50 X 120 X 60

4. Test height: It can be set and adjusted to fall at a certain height.

5. Control box: The separated control box is easy to operate and elegant.

6. Volume: 500 X 500 X 1500MM

7. Power supply: 220V 50Hz

8. Weight approximately: 36KG

9. Power: 2.5KW