2. Main functions:

This machine adopts computer control and is widely used for mechanical performance testing of non-metallic materials such as rubber, plastic, wires and cables, textiles, waterproof materials, non-woven fabrics, as well as metal wires, metal foils, metal sheets, and metal rods. It is also suitable for various finished product tensile, compression, peeling, shearing, tearing, bending (folding) tests when paired with specialized fixtures. It can print multiple types of data and make graphical output comparisons based on different data, with high control accuracy and easy operation; Adopting modular design, with a complete variety of accessory accessories and flexible matching.

This machine is mainly suitable for testing the mechanical properties of metals such as tension, compression, and bending. It can also achieve multiple dead cycle tests such as constant stress, constant strain, creep, relaxation, axial, and radial. According to GB, JIS, ASTM, DIN and other standards, parameters such as tensile strength, yield strength, elongation, constant elongation stress, constant stress elongation, and elastic modulus can be automatically calculated.

3. Introduction to control software:

Software operating system language: Simplified Chinese.
Force units: N, KN, Kgf, Lbf, length units: mm, cm, in can be freely converted
Control method:
Multiple control methods such as setting speed, setting load break (rupture), and running time in computer software
Special manual operation box: convenient for calibration and positioning during specimen holding
Automatically determine material fracture, crushing, etc. and automatically stop the machine, with the option to set automatic return
Curve type:
Load displacement, load time, displacement time.
Stress strain, strain time, stress time.

The vertical and horizontal coordinates of the curve can be set arbitrarily.
Test materials available:
Maximum strength, minimum strength, fracture value, upper and lower yield strength, tensile strength, compressive strength, elastic modulus, elongation, maximum and minimum values of peel interval, average value, etc. (Customers need to select before placing an order) L has multiple protections such as overload, overcurrent, overvoltage, undervoltage, over speed, and travel. L
The data results are exported in the crystal report format commonly used in national standards.

4. Specification parameters:

capacity

10020050010002000kg or less, optional

Accuracy level

Level 0.5, the accuracy of the test force indication is better than ± 0.5%,

Load sensing

High precision tension and pressure sensor (multiple sensors available at the same time - optional)

high resolution

1/100000

Magnification rate

24 bit AD stepless amplification

Unit selection

N. KN

Test speed range

Servo type: 0.5~500 mm/min stepless speed regulation

Speed control accuracy

± 0.2% (0.5 level)

Experimental effective width

400 mm

Test itinerary (including fixtures)

800 mm

Overload setting protection function

When the set test force exceeds 10%, the system will automatically shut down for protection

Travel setting protection function

Travel upper and lower limit position setting protection

power

AC servo motor&servo drive controller

Power consumption

0.5 kVA

source

1 ø, 220 VAC, 50/60 Hz

Measuring hardware specifications

The provided computer hardware specifications can be purchased from the original ACER brand or provided by the customer

System specific software

Refer to the software version of the computer measurement system

Host volume

65x55x220cm

Host weight

200 kg

Standard attachments

One set of tension fixtures, one set of tools, one manual, and one warranty certificate

Punctuation extension meter

Large deformation (gauge length: 25,50,75100mm)

fixture

Refer to the fixture catalog for purchase, or provide sample specifications for design and manufacturing