2. Main functions:

The DZ series computerized tensile testing machine is suitable for testing and analyzing the mechanical properties of rubber, tires, hoses, tapes, soles, plastics, films, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipes, composite materials, waterproof materials, fibers, textiles, wires and cables, paper, gold foil, tapes, silk threads, spring springs, wood, pharmaceutical packaging materials, tapes, etc. (both 90 degrees and 180 degrees can be used).

3. Equipment Overview:

The DZ series computerized tensile testing machine is a new type of material testing machine that combines electronic technology and mechanical transmission. It has a wide and accurate loading speed and force measurement range, and has high accuracy and sensitivity in measuring and controlling loads, deformations, and displacements. This series of models adopts a single space structure, with the testing space in the lower space. It is mainly suitable for testing metal and non-metal materials with a testing load of less than 5kN, and has stress, strain The displacement control method can calculate parameters such as maximum force, tensile strength, bending strength, compressive strength, elastic modulus, fracture elongation, yield strength, etc.

4. Main features:

1. Using a motor frequency converter or servo motor drive, the horizontal beam is driven up and down through a transmission mechanism to achieve the experimental loading process.

The entire control system has a high cost performance ratio and high reliability.

3. The entire test process is controlled by a microcomputer, which dynamically displays the load value, displacement value, deformation value, test speed, and test curve in real time.

4. Using a microcomputer for data processing and analysis, the test results can be automatically saved. After the test is completed, the test curve can be retrieved and the test process can be reproduced through curve traversal, or curve comparison and amplification can be performed.

5. A fully Chinese Windows platform testing software with strong data and graphics processing capabilities, capable of instantly printing complete test reports and curves.

6. Equipped with comprehensive safety protection functions such as limit protection, overload protection, and emergency stop.

Meets standards:

GB/T16491-1996 Electronic Universal Testing Machine

Application industry:

The DZ series computerized tensile testing machine is widely used in wire and cable, hardware, footwear, electronics, packaging and printing, medical equipment, automotive parts, textile and leather, clothing and footwear, rubber and plastic products, and higher education institutions; Research Laboratory; Various industries such as commercial inspection and arbitration, technical supervision departments, etc. are the basic equipment for quality management and physical property testing

5. Specification parameters:

Capacity selection

50N, 100N, 200N, 500N (optional)

Display:

Computer display mode

Power resolution:

1/250000

Power accuracy:

0.5%

Travel resolution:

1/250000

Control method:

Full computer operation mode

Experimental itinerary:

500mm

Experimental width:

φ 140mm

Experimental speed:

0-500mm/min computer settings

Power unit conversion:

Kgf, N, Ibf, g, ton, Mpa

Shutdown mode:

Overload stop, emergency stop button, automatic stop for specimen damage, automatic stop for upper and lower limit setting, and automatic reset function

Machine size:

800 x 300 x 300mm (W x D x H)

Machine power:

Japanese Tamagawa servo motor drive, synchronous wheel and precision ball screw drive

Power:

180W

Machine weight:

Approximately 100kg

Using electricity:

220V 50/60HZ 5A

Standard configuration:

1 set of fixtures, computer software, and data cables;