2. Main functions:

This machine is suitable for testing and analyzing the mechanical properties of rubber, tires, hoses, tapes, shoe soles, plastics, films, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipes, composite materials, waterproof materials, fibers, textiles, wires and cables, paper, gold foils, tapes, silk wires, springs, wood, pharmaceutical packaging materials, tapes, etc. (both 90 degrees and 180 degrees can be used).

This machine is a new type of material testing machine that combines electronic technology and mechanical transmission. It has high accuracy and sensitivity in measuring and controlling load, deformation, and displacement. This series of models adopts a single space structure, with the test space in the lower space. It is mainly suitable for testing metal and non-metal materials with a test load of less than 5kN. It has stress, strain, and displacement control modes, and can calculate the maximum force, tensile strength, bending strength, and compressive strength Parameters such as elastic modulus, fracture elongation, yield strength, etc.

3. Technical parameters:

Capacity selection

2, 5, 10, 20, 50, 100kg

Accuracy level

Level 0.5

Effective force measurement range

0.4% to 100%

Force measurement accuracy

Within ± 0.5% of the indicated value

Resolution of testing machine

Maximum load 1/± 250000 yards, without dividing the inside and outside, and with constant resolution throughout the entire process

Load sensor

Basic configuration: tension and pressure sensors (maximum load)

Effective test width

150mm

Effective stretching space

500mm

Test speed range

50-500mm/min

Displacement measurement accuracy

Within ± 0.5% of the indicated value

Test bench safety device

Electronic limit protection

Test bench return function

There are two options: manual or automatic, and automatic or manual return to the initial position of the test after the end of the test

Overload protection

Exceeding maximum load by 10%, machine automatically protects

Fixture configuration

A set of stretching fixtures

Host size

420 x 350 x 1520mm

electrical machinery

220V ± 10% 0.2KW/0.4KW

Host weight

(Approximately) 50 kg